A ceramic coating makes a car easier to keep clean. It does not make it maintenance-free. Summer in the UAE, with heat, fine sand and hard water, is where coatings either keep their gloss or go dull early.

The first two weeks

Maxguard's coating takes 7 to 14 days to cure fully. In that window:

  • Avoid washing with chemicals and keep the car out of automatic washes.
  • Wipe off bird droppings and water spots gently with a clean microfibre, as soon as you see them.
  • Park in shade where you can. Heat speeds curing, but spots baked on in direct sun are harder to remove.

Washing in the heat

  • Wash early morning or evening, never on a hot panel in direct sun. Shampoo and water dry too fast and leave marks.
  • Rinse the sand off first. Fine sand dragged under a mitt is what scratches coated paint. A thorough pre-rinse does more than any product.
  • Use a pH-neutral shampoo and two buckets, one for clean water.
  • Dry the car with a soft towel. UAE water is hard, and drops left to evaporate leave mineral spots.

What dulls a coating

  • Brush car washes and abrasive polishes.
  • Harsh degreasers used at some washes.
  • Leaving sand and dust on the car for weeks, then wiping it dry.

When to refresh

A coating wears gradually. Maxguard recommends a refresh every 8 to 10 months to keep water beading and gloss at their best. The Maxguard coating carries a 5-year warranty when cared for as directed.

Coating or film?

A coating protects gloss and makes washing easier. It does not stop stone chips. If chips are the worry, paint protection film is the answer, and many owners put a coating on top. Our PPF vs ceramic coating guide compares the two.