Warranty and VIN check

Every Maxguard installation is registered against the vehicle's VIN. Check coverage, read the terms, or start a claim.

Check a warranty

Enter the VIN to see which Maxguard products are registered to the vehicle and when coverage started. Useful when buying a used car too.

17 characters, on your registration card (Mulkiya) and at the base of the windscreen. Letters I, O and Q are not used.

Warranty at a glance

What each Maxguard product warranty covers, how it is registered and how to keep it valid. Full terms follow below.

Maxguard product warranties compared
Warranty detailPaint protection filmCeramic coating
TermShown on your warranty certificate and in the VIN check5-year ceramic coating warranty
CoversManufacturing defects: adhesive failure, bubbling, cracking, peeling, delamination, discoloration and yellowingAs stated on your warranty certificate
Registered toThe vehicle's VINThe vehicle's VIN
Who it coversThe original purchaser; not transferableAs stated on your warranty certificate
Keeping it validDo not wash the vehicle for 3 to 4 days after installation; approved cleaning methods and regular inspectionA refresh visit every 8 to 10 months; allow 7 to 14 days for full cure
How to claimContact the centre that installed the product with your warranty card and tax invoice. Claim steps

Paint protection film: limited warranty

Limited warranty against manufacturing defects (adhesive failure, bubbling, cracking, peeling, delamination, discoloration, yellowing) for the original purchaser on professionally installed film.

The warranty term for your film is shown on your warranty certificate and in the VIN check.

Maxguard's obligation under the warranty is replacement of defective film. The film is designed not to crack, peel or bubble under normal conditions and to be removable without damaging original paint.

Not covered

  • Film applied to repainted, aftermarket or vinyl surfaces. The film is intended for fully cured OEM paint.
  • Damage from external impact, scratches or accidents.
  • Misuse, improper care, abrasive cleaning or unauthorised installation.
  • Installations not performed to Maxguard guidelines.

The warranty applies to the original purchaser and is not transferable. No dealer is authorised to change its terms.

Care conditions

Do not wash the vehicle for 3 to 4 days after installation. After curing, clean using approved methods, avoid pressure-washing near edges and harsh chemicals. Regular inspection and periodic waxing are recommended. Improper maintenance may void the warranty. PPF aftercare guide.

Ceramic coating

Maxguard 10H nano ceramic coating carries a 5-year warranty. Book a refresh visit every 8 to 10 months. Allow 7 to 14 days for full cure.

How to make a claim

  1. Contact the authorised Maxguard centre where the product was installed.
  2. Have your warranty card and original tax invoice ready.
  3. The centre inspects the vehicle and assesses the film.
  4. If the issue is covered, defective film is replaced without charge for the material. Installation or labour charges may apply according to the centre's policy.

The warranty period starts on the installation date on your invoice. Final evaluation of claims rests with the authorised Maxguard centre.

Start a claim on WhatsApp

WhatsApp Get a quote